What is the difference between reinforced wire mesh and steel wire mesh?
Next, High-quality Reinforcement Mesh Supplier will explain to you:
Any kind of steel mesh can be used, but the cost will be higher. The
thickness of the more commonly used general raw materials is below 3 mm. The
smaller the number of knives, the thinner the thickness of the selected raw
materials (knife: the specifications of the steel mesh cutting knife, such as $
40).
Welded wire mesh is a kind of high cost performance, generally cold wire
welding is used, without galvanizing, reducing costs. The wire diameter is
selected according to the needs, generally it is about one millimeter, and it
can be increased or decreased. The aperture is customized according to your
requirements.
The crimped wire mesh is similar to the welded wire mesh, but the cost
performance is low, because nearly 1/5 of the cost is manual, and the mechanism
is burr, which is easy to open.
During the construction, the iron nets should be overlapped, and the joints
should be sewed with fine iron wire, otherwise the time will be long, and the
cracks will occur here.
1. Reinforced Wire Mesh is a different type of steel mesh used in engineering
construction, which is used for pouring concrete structural frames. It is
generally composed of long or coiled steel bars.
2. Steel wire mesh is a mesh product produced by the factory, which is used
for various purposes, such as filtering, enclosure, and transmission.
The wire warp of the steel wire mesh is made of finer wire warp. The mesh is
made by the weaving process. The mesh size is uniform, the size is used within
the calibrated range, and the mesh surface has soft effect characteristics under
the firm effect.
The raw material used to make the steel mesh is round steel, screw steel
material, or welded into a mesh that intersects with the warp and weft crosses.
Under the premise that the spacing between the meshes is large, the thicker wire
warp will form an overall construction than the steel mesh Meshes with smaller
holes are also stronger.
Steel wire mesh is usually used in plastered concrete for building walls to
prevent cracking and delamination of the walls to expose bricks. The use of
steel wire mesh on the wall shows its role in buildings.
Reinforced mesh is usually selected on the ground and corners of the building
to reinforce the walking cracks of the building, causing unnecessary
construction and unqualified buildings.
The advantages and functions of reinforced mesh:
Welded steel mesh is a mesh in which longitudinal steel bars and transverse
steel bars are arranged at a certain distance and at right angles to each other,
and all intersections are welded together.
Germany Standard Reinforcing Mesh
Reinforced mesh advantages:
1. Significantly improve the quality of reinforcement engineering
2. Significantly increase the construction speed
3. Enhance the crack resistance of concrete
4. Has good comprehensive economic benefits
The role of reinforced mesh:
1. Significantly improve the quality of reinforcement engineering
Reinforced mesh is manufactured by fully automatic intelligent production
line under strict quality control of the factory. Mesh size, reinforcement
specifications and quality are strictly controlled. It avoids the omission of
manual ties, errors in ties and cutting corners. The mesh has high rigidity,
good elasticity, uniform and accurate spacing, and high welding point strength,
thus greatly improving the quality of the project.
2. Improve seismic and crack resistance
The longitudinal and transverse ribs of the welded steel mesh form a mesh
structure, so it has good anchorage with the concrete and the load is evenly
distributed. The seismic resistance of the reinforced concrete structure is
significantly improved. According to the actual test, the welding of reinforced
steel mesh on the road can reduce the occurrence of cracks by more than 75%
compared with the artificial help mesh.
3. Save the amount of rebar
The use of rebar welded mesh can save more than 30% of rebar usage. And the
steel mesh needs to be processed after being transported to the construction
site, so there is no loss.
4. Speed up the construction progress
The use of welded steel mesh can make the project construction faster. As
long as the welded steel mesh is laid as required, the concrete can be poured,
eliminating the need for on-site tailoring of the steel bars, placing them one
by one, and tying. It can save 50% -70% working hours, greatly speed up the
construction progress and shorten the construction cycle. Weihe Welded Wire Mesh
has stable quality and fast delivery!
The above is the difference between reinforced mesh and steel mesh introduced
by Germany Standard Reinforcing Mesh supplier.
