Because Rebar Mesh is a metal product, rust is its biggest natural enemy in
use, so when users use this product, it is first necessary to make it have good
corrosion resistance. So how to make the product more resistant to corrosion?
First of all, we need to allow manufacturers to use good information, different
metal materials will have different corrosion resistance, it is because of this,
it will make it have very different corrosion resistance.
Of course, what kind of data a Reinforcement Wire Mesh Manufacturer uses to
make a reinforcement mesh is completely limited by their cost concept. More
manufacturers will lower the standard just to reduce production costs. In
addition, its appearance treatment will also have a great impact on its rust
resistance. Generally, such meshes are also treated on the surface. However,
different manufacturers have different treatment methods, so they will have a
certain effect on their rust prevention performance, and this aspect will also
have a great impact on their rust prevention.
Some manufacturers, although the above two points have been achieved when
producing the reinforcement mesh, but there will still be rust in the process of
user use, which is also what kind of welding process manufacturers. This product
needs to be welded in production, but if the manufacturer's welding seam is too
high, it will have a great impact on the product information. It is a rust
prevention material, but it does not have rust prevention ability at high
temperatures, so in this case, it Will lose the product's anti-rust ability.
Therefore, in order to improve the rust prevention ability of this product, we
must first let the manufacturer have a better welding process.
German Standard Reinforcing Mesh
What points should be paid attention to when building meshes are under
construction? The following German Standard Reinforcing Mesh supplier will come
to tell you a few points:
1. Ensuring project quality: Reinforced mesh is made by a fully automatic and
intelligent production line under the strict quality control of the factory.
Grid standards, reinforcement standards, and quality are tightly controlled.
Avoiding the loss of artificial lashing nets, unstable lashing, erroneous
lashing and cut corners. The mesh has large steel, good properties, uniform and
accurate distance, and high welding point strength. Therefore, the engineering
quality has been greatly improved.
2. Improved anti-seismic and anti-cracking functions: The longitudinal and
transverse bars of the reinforced mesh constitute a network structure, so it has
good adhesion and anchorage with concrete, and the load can be evenly
distributed, which significantly improves the anti-seismic and crack-resistant
functions of the reinforced concrete structure. According to practical tests,
laying welded steel mesh on the road can reduce the occurrence of cracks by more
than 75% compared with artificial lashing mesh.
3. Reduction of the use of reinforcing steel bars: The planning strength of
many round steel bars is currently used, and the planning strength of
reinforcing steel nets is based on the principle of equal strength replacement,
and then considers the general factors. Using the reinforcing steel nets can
save more than 25% of the amount of reinforcing steel used. And the
reinforcement mesh does not need to be processed after being transported to the
construction site, so it is not lost.
4. Accelerate the construction progress: the use of reinforced mesh can
facilitate the construction of the project. As long as the reinforced mesh is
laid as required, the concrete can be irrigated, eliminating the need for
on-site cutting of the reinforcement, placing them one by one, and tying. It can
save man-hours by 50% -70%, greatly speed up the construction progress and
shorten the construction cycle.
5. Decrease project cost: Although the unit price of the reinforcing steel
mesh is higher than that of scattered steel bars, the factors such as data
consumption, data loss, construction speed, ease of construction, labor costs,
on-site processing costs, and mechanical processing costs can be considered to
reduce the reinforcement project. The cost is 5-10%, which has considerable
economic benefits.
The above is the relevant content of the construction mesh, I hope to help
everyone.
